Kia Sedona: Automatic transaxle operationThe automatic transaxle has 6 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE
The first few shifts on a new vehicle, if the battery has been disconnected, may be somewhat abrupt. This is a normal condition, and the shifting sequence will adjust after shifts are cycled a few times by the TCM (Transaxle Control Module) or PCM (Powertrain Control Module).
For smooth operation, depress the brake pedal and the lock release button when shifting from N (Neutral) to a forward or reverse gear.
WARNING - Automatic transaxle
Before leaving the driver High Mounted stop lamp Repair procedures Description and Operation
Depress the brake pedal and the lock
release button when shifting. (If the shift lock system is not equipped, it is not
necessary to depress the brake pedal. However, it is recommended to depre ...
Automatic transaxle
The indicator in the instrument cluster displays the shift lever position when
the ignition switch is in the ON position.
P (Park)
Always come to a complete stop before shifting into P (Park). Thi ...
Transaxle rangesOther Information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear spoiler.
(Refer to Body - "Rear Spoiler")
3.
Remove the high mounted stop lamp assembly (A) after loosening nut ...
OBD-II review
1. Overview
The California Air Resources Board (CARB) began regulation of
On Board Diagnostics (OBD) for vehicles sold in California beginning
with the 1988 model year. The first ...