Inspection |
1. |
Check all the clamps for tightness and the connections for leakage. |
2. |
Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation. |
1. |
Visually check that the fuel tank cap assembly and gasket (A) are not deformed or damaged. |
Canister Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the fuel tank.
(Refer to Engine Control / Fuel System - "Fuel Tank")
3.
Disconnect the ...
Air intake control
Type A
The air intake control is used to select the outside (fresh) air position or
recirculated air position.
To change the air intake control position, press the control button.
Recirculated ...