Kia Sedona: Turn Signal Lamp Repair procedures
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp Repair procedures
| Removal |
Door Mirror Turn Signal Lamp
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the mirror (A) from the mirror holder.
|
| 3. |
Disconnect the heating connector (A) from the mirror.
|
| 4. |
Remove the door mirror housing (B) after separating the mounting clips (A).
|
| 5. |
Remove the door mirror turn signal lamp (A) after loosening the screw.
|
| 6. |
Disconnect the connector (A) from the door mirror turn signal lamp.
|
| Installation |
Door Mirror Turn Signal Lamp
| 1. |
Install the door mirror turn signal lamp. |
| 2. |
Install the door mirror housing. |
| 3. |
Install the door mirror. |
| 4. |
Connect the negative (-) battery terminal. |
Head Lamps Repair procedures
Removal
Head lamps become very hot during use; do not touch them or attach any hardware immediately after turning them off.
•
T ...
Room Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver.
3.
Remove the room lamp (A) after loosening the screws. ...
Other Information:
Low Key Battery (for smart key system)
...
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS to the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Removal
1.
Turn the ignition switch OFF and d ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025