Kia Sedona: Trunk Trim
Rear Pillar Trim Repair procedures
Repair proceduresIgnition Coil Repair procedures
Removal
Ignition coil (Cylinder #1) [Bank 1]
1.
Remove the surge tank.
(Refer to Engine Mechanical System - "Surge Tank")
2.
Disconnect the Ignition coil connector (A).
3.
Remove the i ...
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS (Refer to "Removal").
4.
After immersing the thermistor of the sensor into engine coola ...