Kia Sedona: To cancel cruise control, do one of the following
Third generation YP (2014-2025) / Kia Sedona YP Owners Manual / Driving your vehicle / Cruise control system / To cancel cruise control, do one of the following
- Depress the brake pedal.
- Shift into N (Neutral) with an automatic transaxle.
- Press the CANCEL switch.
- Decrease the vehicle speed lower than the memory speed by 20 km/h (13 mph ).
- Decrease the vehicle speed to less than approximately 30 km/h (20 mph).
Each of these actions will cancel cruise control operation (the SET indicator light in the instrument cluster will go off), but it will not turn the system off. If you wish to resume cruise control operation, move the lever up (to RES+). You will return to your previously preset speed.
To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the
accelerator pedal. Increased speed will not interfere with the cruise control operation
or change the set speed.
To ...
To resume cruising speed at more than approximately 30 km/h (20 mph)
If any method other than the CRUISE ON-OFF switch was used to cancel cruising
speed and the system is still activated, the most recent set speed will automatically
resume when you move the lever ...
Other Information:
Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad lower switch (A) after loos ...
High Beam Indicator Light
This indicator light illuminates :
When the headlights are on and in the high beam position
When the turn signal lever is pulled into the Flash-to-Pass position.
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025