Kia Sedona: Tail Gate Weatherstrip Repair procedures - Tail Gate - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Tail Gate Weatherstrip Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Weatherstrip Repair procedures

Replacement
1.
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
2.
Remove the tail gate weatherstrip (A).
   
Do not apply sealant to the body.

3.
Install in the reverse order of removal.
   
Install the weatherstrip aligned with center line (B).
Tail Gate Lift Repair procedures
Replacement     Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open. ...

Fuel Filler Door
...

Other Information:

Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the connector of the immobiliz ...

Front Impact Sensor (FIS) Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front i ...

Categories


Copyright © www.kisedona.com 2016-2025