Kia Sedona: Surge Tank Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Intake And Exhaust System / Surge Tank Components and Components Location

Air Cleaner Repair procedures

Removal and Installation Air Cleaner Assembly 1. Remove the engine cover. (Refer to Engine And Transaxle Assembly - "Engine Cover") 2. Remove the air duct (A). 3. Remove the battery. (R ...

Surge Tank Repair procedures

Removal and Installation 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 2. Remove the air duct. (Refer to Intake And Exhaust System - "Air Cleaner") ...

Other Information:

Front Seat Assembly Repair procedures
Replacement 1. Open the front seat mounting bolt cap (A), then loosen the mounting bolts (B). Tightening torque : 44.1 ~ 58.8N.m (4.5 ~ 6.0kgf.m, 32.5 ~ 43.4lb-ft) [Front] [Rear] 2. Di ...

Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the speci ...