Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly (A) after loosening 2 screws. |
3. |
Check for continuity between the terminals. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver. |
3. |
Remove the room lamp (A) after loosening the mounting screws. |
4. |
Check for continuity between the terminals. |
Shift to P position (for smart key system)
This warning message illuminates if you try to turn off the engine without
the shift lever in P (Park) position.
At this time, the Engine Start/Stop Button turns to the ACC position (If
y ...
Electronic Power Steering (EPS) Warning Light
This warning light illuminates :
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It remains on until the engine is started.
When there is a malfunction wit ...