Kia Sedona: Intake Air Temperature Sensor (IATS) Description and Operation
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Description and Operation
| Description |
Integrated into the Barometric Pressure Sensor (BPS), the
Intake Air Temperature Sensor (IATS) detects the intake air temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the
temperature. So the ECM uses not only BPS signal but also IATS signal.
This sensor has a Negative Temperature Coefficient (NTC) thermistor and
it''s resistance changes in reverse proportion to the temperature.
Intake Air Temperature Sensor (IATS) Specifications
Specification
TemperatureResistance (kΩ)°C°F-40-4040.93 ~ 48.35-20-413.89 ~ 16.030325.38 ~ 6.0910503.48 ~ 3.9020682.31 ~ 2.57401041.08 ~ 1.21601400.54 ~ 0.66801760.29 ~ 0.34
...
Intake Air Temperature Sensor (IATS) Schematic Diagrams
Circuit Diagram
...
Other Information:
Inhibitor Switch Repair procedures
Inspection
Power Circuit Inspection
1.
Disconnect the Inhibitor switch connector.
2.
Ignition KEY "ON"" & Engine "OFF"..
3.
Measure voltage between supplied power and ground at inhi ...
Front Seat Belt Buckle Repair procedures
Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the front seat belt buckle connector wiring (A).
3.
After loosening the mounting ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026