Kia Sedona: Specifications - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Emission Control System / Specifications

Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo-Resistive Pressure Sensor
▷ Specification
Pressure (kPa)
Output Voltage (V)
-6.67
0.5
0
2.5
+6.67
4.5

Canister Close Valve (CCV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.5 ~ 22.5 [20°C(68°F)]

Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive Crankcase Ventilation (PCV) Valve
0.8 ~ 1.2
7.8 ~ 11.8
5.8 ~ 8.7
Canister mounting bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3
Fuel tank air filter mounting bolt
0.4 ~ 0.6
3.9 ~ 5.9
2.9 ~ 4.3

Emission Control System
...

Components and Components Location
Components Location 1. PCV Valve2. Canister3. Purge Control Solenoid Valve (PCSV)4. Fuel Tank Pressure Sensor (FTPS)5. Canister Close Valve (CCV)6. Fuel Level Sender (FLS)7. Fuel Tank Air Filt ...

Other Information:

Front Seat Belt Buckle Repair procedures
Replacement 1. Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly") 2. Disconnect the front seat belt buckle connector wiring (A). 3. After loosening the mounting ...

Highway driving
Tires Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may r ...

Categories

Copyright © www.kisedona.com 2016-2026