Kia Sedona: Battery Sensor Description and Operation
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Electrical System / Charging System / Battery Sensor Description and Operation
| Description |
Vehicles have many control units that use more electricity.
These units control their own system based on information from various
sensors. It is important to provide a stable power supply as these
sensors bring diverse information. Battery sensor is mounted on battery
(-) terminal. It transmits battery voltage, current, temperature
information to ECM. ECM controls generating voltage by duty cycle based
on these signals.
Battery Troubleshooting
Troubleshooting
...
Battery Sensor Repair procedures
Removal
1.
Turn the ignition switch OFF.
2.
Disconnect the battery negative (-) terminal (A).
Battery negative (-) terminal tightening nut :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft ...
Other Information:
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS (Refer to "Removal").
4.
After immersing the thermistor of the sensor into engine coola ...
Troubleshooting
Troubleshooting
SymptomPossible causeRemedyOnly one lamp lights on(All exterior lamps)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not light onBulb b ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright В© www.kisedona.com 2016-2025