Removal and Installation
1.
Remove the engine room under cover and engine room RH side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
2.
Remove the RH side front ...
Replacement
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pulley")
2.
Remove the front oil seal (A).
3.
Using SST (09231-3C100), install a new fron ...
Other Information:
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...