Kia Sedona: Idler Repair procedures - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Idler Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Idler Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the drive belt idler (A).

Tightening torque :
53.9 ~ 57.9 N.m (5.5 ~ 5.9 kgf.m, 39.8 ~ 42.7 lb-ft)

3.
Install in the reverse order of removal.
Inspection
Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
Idler Components and Components Location
Components 1. Idler ...

Drive Belt Tensioner Components and Components Location
Components 1. Drive belt tensioner ...

Other Information:

When Active ECO is activated
The engine noise may get louder. The vehicle speed may slightly be reduced. The air conditioner performance may be affected. ...

Exterior care
Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. ...

Categories


Copyright В© www.kisedona.com 2016-2025