Kia Sedona: Engine Room Under Cover Repair procedures - Engine And Transaxle Assembly - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Engine Room Under Cover Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Room Under Cover Repair procedures

Removal
Engine Room Front Under Cover
1.
Remove the engine room front under cover (A).

Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

2.
Install in the reverse order of removal.
Engine Room Side Cover
1.
Remove the engine room front under cover.
2.
Remove the engine room side cover (A).

Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.0 ~ 8.0 lb-ft)

RH

RH

3.
Install in the reverse order of removal.
Engine Room Under Cover Components and Components Location
Components 1. Engine room RH side cover2. Engine room LH side cover3. Engine room front under cover ...

Engine Mounting Components and Components Location
Components 1.Engine mounting support bracket2.Engine mounting bracket3.Transaxle mounting bracket4.Roll rod bracket ...

Other Information:

Climate Control Air Filter Repair procedures
Filter inspection The climate control air filter should be replaced according to the maintenance schedule. If the vehicle is operated in severely polluted city or on dusty rough roads for a long ...

Oil Pump Components and Components Location
Components Location 1. Automatic transaxle2. Oil pump assembly ...

Categories


Copyright В© www.kisedona.com 2016-2025