Kia Sedona: Engine Cover Repair procedures - Engine And Transaxle Assembly - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Engine Cover Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Cover Repair procedures

Removal and Installation
1.
Remove the engine cover (A).

   
•
Lift up the lower end of engine cover, then left and right alternately.
•
When installing, check that the mounting rubber insulators are installed.
2.
Install in the reverse order of removal.
Engine And Transaxle Assembly
...

Engine Room Under Cover Components and Components Location
Components 1. Engine room RH side cover2. Engine room LH side cover3. Engine room front under cover ...

Other Information:

Shift Lever Repair procedures
Removal 1. Move the shift lever to "N" range. 2. Disconnect the battery negative (-) cable. 3. Remove the knob (A) and boots (B) by pulling them in the direction of the arrow after separ ...

Sub Frame Repair procedures
Removal 1. Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box. Tightening torque: 32.4 ~ 37.3N.m (3.3 ~ 3.8kgf.m, 23.9 ~ 27.5lb-ft) ...

Categories


Copyright © www.kisedona.com 2016-2024