Basic Service Symbols |
Symbol | Meaning |
Do not reuse the part. Replace a new one. | |
Apply engine oil or transmission oil to the part. | |
Apply automatic transmission fluid (ATF) to the part. | |
Apply grease to the part. | |
Apply sealant to the part. |
Rear Axle Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damag ...
Engine Control Module (ECM) Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove the air cleaner asse ...