Kia Sedona: Removal and reinstallation
To remove the headrest :
1. Raise it as far as it can go then press the release button (1) while pulling the headrest up (2).
To reinstall the headrest :
1. Put the headrest poles (3) into the holes while pressing the release button (1).
2. Adjust it to the appropriate height.
After installing the headrest, make sure that it is installed in the right direction.
A headrest installed reversely could increase whiplash injury during rear impact.
WARNING
The second row headrest is equipped with auto-folding function.The cable may become dislocated or damaged when the headrest is removed, and may lead to auto-folding function failure.
Adjusting the height up and down
2nd row outboard
2nd row center
2nd row for SXL package
3rd row
To raise the headrest :
1. Pull it up to the desired position (1).
To lower the headrest :
1. Push and hold the release ...
2nd row outboard headrest
The headrest will fold down automatically when the seat is in the walk in potion.
Always be sure the headrest has locked into position after you return the seatback. ...
Other Information:
Refrigerant Line Repair procedures
Replacement
1.
Discharge refrigerant from the refrigeration system.
2.
Replace faulty tube or hose.
Cap the open fittings immediately to keep moisture or dirt out ...
Transaxle Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the solenoid valve connector (A).
4.
Me ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual