Kia Sedona: Auto light position
Third generation YP (2014-2026) / Kia Sedona YP Owners Manual / Features of your vehicle / Lighting / Position & Tail light / Auto light position
When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle.
- Never place anything over the sensor (1) located on the instrument panel. This will ensure better autolight system control.
- Don
Headlight position
When the light switch is in the headlight position, the head, tail, license lights
will turn ON.
✽ NOTICE
The ignition switch must be in the ON position to turn on the headlights. ...
High beam operation
To turn on the high beam headlights, push the lever away from you. Pull it back
for low beams. The high beam indicator will light when the headlight high beams
are switched on.To prevent the bat ...
Other Information:
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Brake Pedal Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad).
3.
Remov ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026