A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation. By saving the desired position into the system memory, different drivers can reposition the driver seat based upon their driving preference. If the battery is disconnected, the desired seat position memory will need to be re-saved.
WARNING
Never attempt to operate the driver position memory system while the vehicle is moving. This could result in loss of control, and an accident causing death, serious injury.
CVVT Oil Temperature Sensor (OTS) Repair procedures
Inspection
[Resistance Inspection]
1.
Turn the ignition switch OFF.
2.
Remove the OTS. (Refer to "Removal")
3.
After immersing the thermistor of the sensor into engine coolant, measure ...
Schematic Diagrams
Circuit Diagram
Connector Pin Information
No.Motor ConnectorSunroof Wiring Connector1Battery 1GND 12Open alarmRear lock switch3GND 1IGN4Rear lock switchSignal C5-Signal A6Signal CBattery 17Signa ...