Kia Optima Manuals

Kia Sedona: Components and Components Location - Surround View Monitoring (SVM) System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Components and Components Location

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Surround View Monitoring (SVM) System / Components and Components Location

Components

   
1) SVM unit basically uses C-CAN signal only to communicate about the vehicle''s condition.
•
Steering wheel angle sensor : C-CAN
•
Vehicle speed sensor : C-CAN
2) Other unit''s B-CAN, P-CAN, and MM-CAN signals are changed to C-CAN signal and sent to SVM unit by CGW (Central Gate Way).
•
AVN monitor : MM-CAN
•
Transmission : P-CAN (TCM unit)
•
SPAS sensor : C-CAN (AVM unit)
•
PAS sensor : B-CAN (BCM)
Component Functions
No.
Components
Quantity
Major Role
1
SVM Unit
1
–
Input video information from 4 channel cameras and process display
–
Vehicle communication (CAN) and system control
–
Screen output in 8 view modes
2
Ultra optical camera
(190 degrees)
4
–
Record vehicle''s surrounding area
3
AVN Head Unit
1
–
Provide driver with video via SVM ECM output
–
Send user input data to SVM ECU
4
SVM Switch
1
–
Input video feed in Front Mode

Surround View Monitoring (SVM) System
...

Description and Operation
Description Surround View Monitoring System (SVM) is the system that allows video monitoring of 360 degrees around the vehicle. The system consists of 4 ultra optical cameras mounted around the ...

Other Information:

Trailer brakes
If your trailer is equipped with a braking system, make sure it conforms to your state ...

Repair procedures
Removal     Put on gloves to protect your hands.     Use seat covers to avoid damaging any surfaces. 1. Remove the luggage side trim. (Refe ...

Categories


Copyright © www.kisedona.com 2016-2025