Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly (A) after loosening 2 screws. |
3. |
Check for continuity between the terminals. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Carefully remove the lamp lens (A) from the room lamp with a flat-tip screwdriver. |
3. |
Remove the room lamp (A) after loosening the mounting screws. |
4. |
Check for continuity between the terminals. |
Transmitter precautions
The transmitter will not work if any of following occur :
- The ignition key is in the ignition switch.
- You exceed the operating distance limit (about 10 m [30 feet]).
- The battery in the t ...
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the ...