Kia Sedona: Smart Tailgate Latch Repair procedures| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the tail gate trim.
(Refer to Body - "Tail Gate Trim") |
| 3. |
Disconnect the smart tailgate latch and PCU assembly connector (A).
|
| 4. |
Loosen the smart tailgate latch mounting bolts. |
| 5. |
Remove the smart tailgate latch and PCU assembly (A) after loosening the nuts.
|
| Installation |
| 1. |
Install the smart tailgate latch and PCU assembly. |
| 2. |
Connect the smart tailgate latch and PCU assembly connector. |
| 3. |
Install the tail gate trim. |
| 4. |
Connect the negative (-) battery terminal. |
| Inspection |
| Inspection of the Smart Tailgate using GDS |
| 1. |
Check up through GDS analyzing device, the failure code,
monitoring on entered value, and by forcefully operating actuator and
self diagnosis, failed area can be detected promptly. |
| 2. |
Select the vehicle and menu to analyze the Smart Tailgate module. |
| 3. |
Select the "STM" to check the DTC of the power trunk module. |
| 4. |
Select the "Service Data" to see the current status in
accordance with the input/output value. Offer status of the each switch
and sensor.
|
Smart Tailgate Unit Repair procedures
Anti-Pinch Strip Repair proceduresAir intake control
Type A
The air intake control is used to select the outside (fresh) air position or
recirculated air position.
To change the air intake control position, press the control button.
Recirculated ...
Power Seat Motor Repair procedures
Inspection
Diagnosis With GDS
1.
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following in ...