Kia Sedona: Anti-Pinch Strip Repair procedures| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the tail gate trim.
(Refer to Body - "Tail Gate Trim") |
| 3. |
Disconnect the anti-pinch strip sensor connector (A).
|
| 4. |
Remove the anti-pinch strip (A) after disconnecting the mounting clip.
|
| Installation |
| 1. |
Install the smart tailgate anti-pinch strip. |
| 2. |
Disconnect the smart tailgate anti-pinch strip sensor connector. |
| 3. |
Install the tail gate trim. |
| 4. |
Connect the negative (-) battery terminal. |
Smart Tailgate Latch Repair procedures
STG Spindle Repair proceduresHow to reset the power sliding door and power tailgate
If the battery has been discharged or disconnected, the related fuse has been
replaced or disconnected, and the power sliding door or power tailgate doesn't work
properly, the power sliding ...
96,000 km (60,000 miles) or 48 months
❑ Rotate tire
❑ Inspect battery condition
❑ Inspect vacuum hose
❑ Inspect air conditioning refrigerant
❑ Inspect brake hoses and lines
❑ Inspect drive sh ...