Kia Sedona: Smart Tailgate Unit Repair procedures - Smart Tailgate System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Smart Tailgate Unit Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Smart Tailgate System / Smart Tailgate Unit Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the smart tailgate unit connector (A).

4.
Remove the smart tailgate unit (A) after loosening the nuts.

Installation
1.
Install the smart tailgate unit.
2.
Connect the smart tailgate unit connector.
3.
Install the luggage side trim [RH].
4.
Connect the negative (-) battery terminal.
Smart Tailgate Unit Schematic Diagrams
Circuit Diagram ...

Smart Tailgate Latch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tail gate trim. (Refer to Body - "Tail Gate Trim") 3. Disconnect the smart tailgate latch and PCU assembly connector ...

Other Information:

Components and Components Location
Components 1. BCM (TPMS Receiver)2. TPMS Sensor (FL)3. TPMS Sensor (RL)4. TPMS Sensor (RR)5. TPMS Sensor (FR) ...

Loss of the smart key
A maximum of 2 smart keys can be registered to a single vehicle. If you happen to lose your smart key, you will not be able to start the engine. You should immediately take the vehicle and remainin ...

Categories

Copyright © www.kisedona.com 2016-2026