Kia Sedona: Specifications - BCM (Body Control Module) - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / BCM (Body Control Module) / Specifications

Specifications
Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 ~ 16V
Operating temperature
-104°F ~ 185°F (-40°C ~ 85°C)
Dark current
RKE : 2mA
SMK : 1.5mA
Keyless : 1.5mA

BCM (Body Control Module)
...

Components and Components Location
Components Connector Pin Information No.Connector AConnector BConnector C1Rear washer motor_output-Multifunction switch GND2Front washer motor_outputReserved1_outputAuto light sensor_input3Power ...

Other Information:

Front Seat Belt Pretensioner Repair procedures
Replacement     When installing the belt, be careful not to damage the pretensioner. 1. Remove the center pillar upper trim. (Refer to Interior Trim - "Center Pillar ...

Starter Relay Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuse box cover. 3. Remove the starter relay (A). 4. Check for continuity between ...

Categories


Copyright © www.kisedona.com 2016-2025