Replacement
[Second row center seat belt retractor]
When installing the belt, make sure not to damage the retractor.
1.
Remove the roof trim assembly.
(Refer t ...
Replacement
[Second row seat belt buckle]
1.
Using a screwdriver or remover, remove the leg outer cover (A).
2.
Remove the second row seat belt buckle (A) after loosening the bolt.
3.
I ...
Other Information:
Repair procedures
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line").
...
Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor).
Repl ...