Replacement |
[Second row seat belt buckle] |
1. |
Using a screwdriver or remover, remove the leg outer cover (A). |
2. |
Remove the second row seat belt buckle (A) after loosening the bolt. |
3. |
Install in the reverse order of removal. |
[Second row center seat belt buckle] |
1. |
Remove the second row center seat.
(Refet to Rear Seat - "Rear Seat Assembly") |
2. |
Remove the center seat cushion side cover [RH] (A) after loosening the screw. |
3. |
Remove the second row center seat belt buckle (A) after loosening the bolt. |
[Third row seat belt buckle] |
1. |
Remove the third row seat cushion assembly.
(Refer to Rear Seat -"Rear Seat Cushion Cover") |
2. |
Remove the third row seat belt buckle (A) after loosening the bolt. |
Input Speed Sensor Specifications
Specification
ItemSpecificationTypeHall effect sensorOperation condition (°C)°F(-40 ~ 150)-40 ~ 302Output voltage (V)High: 1.18 ~ 1.68Low: 0.59 ~ 0.84
...
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desi ...