Kia Sedona: Rear Transverse Trim Repair procedures - Interior Trim - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Transverse Trim Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Transverse Trim Repair procedures

Replacement
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
   
Take care not to bend or scratch the trim and panels.
1.
Remove the tailgate weatherstrip.
(Refer to Tailgate - " Tailgate Weatherstrip")
2.
Remove the rear luggage board (A).

3.
Remove the rear transverse trim (A) after loosening the mounting screws.

4.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Transverse Trim Components and Components Location
Component Location 1. Rear transverse trim ...

Luggage Side Trim Components and Components Location
Component Location 1. Luggage side trim ...

Other Information:

Towing up hill
When towing a trailer on steep grades (in excess of 6%) pay close attention to the engine coolant temperature gauge to ensure the engine does not overheat. If the needle of the coolant tempera ...

Fuel Pressure Control Valve (FPCV) Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fu ...

Categories


Copyright © www.kisedona.com 2016-2025