Replacement |
1. |
Remove the cap (A), the nuts and the wiper arm (B).
|
2. |
Disconnect the cowl top cover nozzle hose (A). |
3. |
Remove the cowl top side cover (A). |
4. |
Detach the clips, and then remove the cowl top cover (B). |
5. |
Install in the reverse order of removal.
|
Auto Light Sensor Repair procedures
Inspection
Check if the auto light control operates like a timing chart
shown below. Tail lamp output and head lamp (Low) output is controlled
based on the auto light sensor''s input (illuminat ...
General Information
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Check the battery for damage, state of charge, and clean and tight c ...