Kia Sedona: Front Door Side Weatherstrip Repair procedures - Front Door - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Door Side Weatherstrip Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Door / Front Door Side Weatherstrip Repair procedures

Replacement
1.
Loosen the front door checker (B) mounting bolt.

Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m,14.5 ~ 21.7 lb-ft)

2.
Detach the clips, and then remove the front door side weatherstrip (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Door Belt Inside Weatherstrip Repair procedures
Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. Remove the front door belt inside weatherstrip (A). 3. Install in the reverse order of removal. ...

Rear Door
...

Other Information:

Barometric Pressure Sensor (BPS) Description and Operation
Description Barometric Pressure Sensor (BPS) is a speed-density type sensor and is installed on the air cleaner assemby. It senses absolute pressure of the air cleaner assemby and transfers the ...

Auto light position
When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle. Never place anything ...

Categories


Copyright В© www.kisedona.com 2016-2024