Kia Sedona: How to reset the power sliding door and power tailgate - Power sliding door and power tailgate - Features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: How to reset the power sliding door and power tailgate

Third generation YP (2014-2025) / Kia Sedona YP Owners Manual / Features of your vehicle / Power sliding door and power tailgate / How to reset the power sliding door and power tailgate

If the battery has been discharged or disconnected, the related fuse has been replaced or disconnected, and the power sliding door or power tailgate doesn't work properly, the power sliding door and power tailgate must be reset as follows:

Automatic stop and reversal
If the power opening or closing is blocked by an object or part of the body, the power sliding door and power tailgate will detect the resistance, chime 3 times, and then either stop or move t ...

For power sliding door
1. Put the shift lever in the P (Park). 2. Close the fuel filler lid. 3. Change the position of fuse switch to OFF on the driver's side fuse panel and change the position of fuse switch to ON ...

Other Information:

Water Jacket Seperator Repair procedures
Removal 1. Remove the LH/RH cylinder head assembly and gasket. (Refer to Cylinder Head Assembly - "Cylinder Head") 2. Remove the water jacket seperators (A). Installation 1. Install the ...

Detecting sensor
The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. ...

Categories


Copyright В© www.kisedona.com 2016-2025