Kia Sedona: For power tailgate
1. Put the shift lever in P (Park).
2. Press the tailgate handle switch and tailgate close button at the same time for more than 3 seconds. (the chime will sound).
3. Close the tailgate manually.
4. Open the tailgate using the tailgate handle switch and allow it to fully open.
5. After fully opening, the tailgate will complete initialization and lights will flash twice indicating reset complete.
If the power tailgate does not work properly after the above procedure, have the system checked by an authorized Kia dealer.
For power sliding door
1. Put the shift lever in the P (Park).
2. Close the fuel filler lid.
3. Change the position of fuse switch to OFF on the driver's side fuse panel
and change the position of fuse switch to ON ...
Power door ON/OFF button
When the power door ON/OFF button is ON (not depressed), the power sliding
door and power tailgate can be controlled with the sub control buttons on the
center pillar trim or tailgate. Also ...
Other Information:
Drive Belt Repair procedures
Removal and Installation
1.
Remove the engine room under cover and engine room RH side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
2.
To release the tension, t ...
Rear Wheel Speed Sensor Components and Components Location
Components
1. Rear wheel speed sensor 2. Rear wheel speed sensor cable
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual