Kia Sedona: Repair procedures - Hood - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Hood / Repair procedures

Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) clearance by moving it up and down, or left and right.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
3.
After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down, or left and right.

Hood
...

Hood Assembly Components and Components Location
Component Location 1. Hood assembly ...

Other Information:

Repair procedures
Adjustment Glass Adjustment     Check the glass run channel for damage or deterioration, and replace if necessary. 1. Remove the front door trim. (Refer to Front Do ...

Schematic Diagrams
Circuit Diagram Connector Pin Information No.Motor ConnectorSunroof Wiring Connector1Battery 1GND 12Open alarmRear lock switch3GND 1IGN4Rear lock switchSignal C5-Signal A6Signal CBattery 17Signa ...

Categories

Copyright © www.kisedona.com 2016-2026