Kia Sedona: Repair procedures
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Fender / Repair procedures
| Replacement |
Be careful not to damage the fender and body. |
When removing the clips, use a clip remover. |
| 1. |
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover") |
| 2. |
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps") |
| 3. |
Remove the delta fixed glass.
(Refer to "Delta Fixed Glass") |
| 4. |
Rmove the cowl top side cover (A).
|
| 5. |
Remove the fender side cover (A).
|
| 6. |
Loosen the wheel nut (A) and remove the wheel (B).
|
| 7. |
Remove the front mud guard.
(Refer to "Front Mud Guard") |
| 8. |
Loosen the front wheel guard mounting clips and screws.
|
| 9. |
Loosen the screw and remove the front bumper bracket (A).
|
| 10. |
Loosen the bolts & nut and remove the fender (A).
|
| 11. |
Install in the reverse order of removal.
|
Components and Components Location
Component Location
1. Fender assembly
...
Hood
...
Other Information:
Engine Control Module (ECM) Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove the air cleaner asse ...
Description and Operation
Description
BSD system uses two magnetic wave radar sensors attached on
the rear panel to measure the distance from the following vehicles and
provide sensing and (visual and auditory) alarms f ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025