Kia Sedona: Components and Components Location| Component Location |

| 1. Fender assembly |
Fender
Repair proceduresRail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS to the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Removal
1.
Turn the ignition switch OFF and d ...
In-car Sensor (DATC only) Description and Operation
Description
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor consists of a thermistor that measures the inside
temperature. The signal decided by the r ...