Kia Sedona: Seat Belt Buckle Switch (BS) Repair procedures
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Repair procedures
| Removal |
| 1. |
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. |
| 2. |
Remove the front seat assembly.
(Refer to Body - "Front seat") |
| 3. |
Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch (A).
|
| Installation |
When installing the harness wires, be sure that they are not pinched or interfering with other parts.
|
| 1. |
Remove the ignition key from the vehicle. |
| 2. |
Disconnect the battery negative cable, and wait for at least 30 seconds before beginning to work. |
| 3. |
Install the seat belt buckle switch.
|
| 4. |
Install the front seat assembly.
(Refer to Body - "Front seat") |
| 5. |
Reconnect the battery negative cable. |
| 6. |
After installing the seat belt buckle switch, confirm proper system operation:
|
Passive Occupant Detection System (PODS-F) Description and Operation
Description
In order to make normal activation of airbag system, SRSCM
detects DTC(s) for the Passive occupant detection system (PODS-F). If
the seat is occupied, PODS-F detects passenger prese ...
Other Information:
Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...
Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several
years. When replacement is necessary, use the following procedure.
1. Insert a slim tool into the slot and gentl ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025