Kia Sedona: Power Steering Oil Pump Repair procedures - Hydraulic Power Steering System - Steering System - Kia Sedona YP Service ManualKia Sedona: Power Steering Oil Pump Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Steering System / Hydraulic Power Steering System / Power Steering Oil Pump Repair procedures

Removal
1.
Drain the power steering fluid.
2.
Remove the drive belt.
(Refer to Engine Mechanical System - "Drive Belt")
3.
Remove the pressure hose (B) from the oil pump and the suction hose from the suction pipe (C).

Tightening torque:
53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.8 ~ 47.0 lb-ft)

4.
Loosen the mounting bolts (A) and then remove the power steering pump.

Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)

5.
Install in the reverse order of removal.
Installation
1.
Install in the reverse order of removal.
2.
Add power steering fluid to reservoir.
3.
Bleed the power steering system.
(Refer to General Information - "Repair procedures(Air bleeding)")
Power Steering Hoses Repair procedures
Removal 1. Drain the power steering fluid. 2. Remove the surge tank. (Refer to Engine Mechanical System - "Surge Tank") 3. Remove the center muffler (Refer to Engine Mechanical System - ...

Steering wheel
...

Other Information:

Side Impact Sensor (SIS) Description and Operation
Description Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensors (P-SIS), installed at each center of front door modules (LH and RH), two SIS, installed at each center o ...

Electronic stability control (ESC)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC appl ...

Categories

Copyright © www.kisedona.com 2016-2026