Specifications |
Item | Specification | |
Type | Motor Driven Power Steering | |
Hydraulic Power Steering System | ||
Steering gear | Type | Rack & Pinion |
Rack stroke | 168mm | |
Steering angle(Max.) | Inner | 41.91° |
Outer | 32.84° | |
Power steering pump | Type | Vane |
Relief pressure | 100 ~ 105 kgf/cm² (1422 ~ 1493 psi) | |
Power steering oil | PSF-3 or PSF-4 (Power Steering Fluid, MS517-16) |
Item | Tightening torque (kgf.m) | ||
Nm | kgf.m | lb-ft | |
Tire wheel hub nuts | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
Steering wheel lock nut | 39.2 ~ 49.0 | 4.0 ~ 5.0 | 28.9 ~ 36.2 |
Steering column assembly to Universal joint | 49.0 ~ 58.8 | 5.0 ~ 6.0 | 36.2 ~ 43.4 |
Steering column mounting bolts | 44.1 ~ 49.0 | 4.5 ~ 5.0 | 32.5 ~ 36.2 |
Steering column mounting nuts | 24.5 ~ 29.4 | 2.5 ~ 3.0 | 18.1 ~ 21.7 |
Universal joint to gear box | 32.4 ~ 37.3 | 3.3 ~ 3.8 | 23.9 ~ 27.5 |
Steering gear box to sub freame | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
Heat protector nut and bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
Pressure hose bracket bolt | 6.9 ~ 10.8 | 0.7 ~ 1.1 | 5.1 ~ 8.0 |
Gear box fit tube | 11.8 ~ 17.7 | 1.2 ~ 1.8 | 8.7 ~ 13.0 |
Pressure hose | 53.9 ~ 63.7 | 5.5 ~ 6.5 | 39.8 ~ 47.0 |
Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor).
Repl ...
Rear Center Seat Belt Retractor Repair procedures
Replacement
[Second row center seat belt retractor]
When installing the belt, make sure not to damage the retractor.
1.
Remove the roof trim assembly.
(Refer t ...