Kia Sedona: TPMS Sensor Description and Operation

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Sensor Description and Operation

Description

Function

•	By detecting the pressure, temperature, acceleration, and battery condition, transmit information to ECU by a wireless RF.

•

Structure and features

•	In a vehicle, there are 4 TPMS sensors, installed to each wheel.

•	Frequency is changed by FSK, and High Line is used in common.

Mode

•	It is consists of the initial factory mode (EOL test mode), the stop and driving mode, and the automatic learning mode.

Troubleshooting

TPMS Inspection method Inspection Find the inspection number by referring to the table above. The following content is irrelevant of the inspection procedure. 1. ...

TPMS Sensor Repair procedures

Removal 1. Remove the tire. (Refer to Tires/Wheels - "Tire") 2. Remove the screw with torx driver (A). • When installing the bead brake, make sure tha ...

Other Information:

Parking assist system
The Parking Assist System is not a substitute for proper and safe parking and backing-up procedures. Always drive safely and use caution when parking. The Parking Assist System may not detect ev ...

Engine Mounting Repair procedures
Removal and Installation Engine Mounting Bracket 1. Disconnect the battery negative terminal. 2. Install the jack to the edge of the lower oil pan (A) to support the engine. &n ...

Kia Sedona: TPMS Sensor Description and Operation

Troubleshooting

TPMS Sensor Repair procedures

Other Information:

Categories