Kia Sedona: Tire Pressure Monitoring System

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Suspension System / Tire Pressure Monitoring System

Wheel Repair procedures

Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, fin ...

Components and Components Location

Components 1. BCM (TPMS Receiver)2. TPMS Sensor (FL)3. TPMS Sensor (RL)4. TPMS Sensor (RR)5. TPMS Sensor (FR) ...

Other Information:

Knock Sensor (KS) Repair procedures
Removal [Bank 1] 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold") ...

Emergency Fastening Device (EFD) Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least 30 seconds before beginning to work. 2. To remove the locking mechanism (A), using a flatheaded (-) screwdriver (B), ...