Kia Sedona: Rear Upper Arm Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Suspension System / Rear Suspension System / Rear Upper Arm Repair procedures

Rear Shock Absorber Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Rear Lower Arm Repair procedures

Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Other Information:

Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Removal 1. Turn the ignition switch OFF and d ...

For best battery service
Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or terminal grease. Rinse any spil ...