Troubleshooting |
Trouble Symptom | Probable cause | Remedy |
Vehicle pulls to one side | Scoring of driveshaft ball joint | Replace |
Wear, rattle or scoring of wheel bearing | Replace | |
Defective front suspension and steering | Adjustment or Replace | |
Vibration | Wear, damage or bending of driveshaft | Replace |
Driveshaft rattle and hub serration | Replace | |
Wear, rattle or scratching of wheel bearing | Replace | |
Shimmy | Defective wheel balance | Adjustment or Replace |
Defective front suspension and steering | Adjustment or Replace | |
Excessive noise | Wear, damage or bending of driveshaft | Replace |
Rattle of driveshaft and worn hub splines | Replace | |
Wear, rattle or scoring of wheel bearing | Replace | |
Loose hub nut | Adjustment or Replace | |
Defective front suspension and steering | Adjustment or Replace |
Blind Spot Detection Switch Components and Components Location
Component
...
Engine Control Module (ECM) Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove the air cleaner asse ...