Kia Sedona: Shift Lever Components and Components Location - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Shift Lever Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Components and Components Location

Components

1. Shift lever
2. Shift lever bracket
3. Main shaft
4. Manual mode switch housing
5. Shift lock solenoid




6. Key interlock switch
7. Main connector
8. Shift cable assembly
9. Shift cable retainer




Inhibitor Switch Repair procedures
Inspection Power Circuit Inspection 1. Disconnect the Inhibitor switch connector. 2. Ignition KEY "ON"" & Engine "OFF".. 3. Measure voltage between supplied power and ground at inhi ...

Shift Lever Repair procedures
Removal 1. Move the shift lever to "N" range. 2. Disconnect the battery negative (-) cable. 3. Remove the knob (A) and boots (B) by pulling them in the direction of the arrow after separ ...

Other Information:

Fuel Pump Repair procedures
Inspection [Fuel pump] 1. Turn the ignition switch OFF, and then remove battery (-) terminal. 2. Remove the fuel pump assembly. (Refer to Fuel Pump - "Removal") 3. Check that motor ope ...

Passive Occupant Detection System (PODS-F) Repair procedures
Removal PODS-F ODU (Occupant Detection Unit) 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning to work. 2. Remove the front passenger seat assembl ...

Categories


Copyright В© www.kisedona.com 2016-2024