Specification |
Item | Specification |
Control type | N/H (Normal High) |
Control pressure kpa (kgf/cm², psi) | "500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)" |
Current value (mA) | 50 ~ 850 |
Coil resistance(Ω) | 5.1 ± 0.3 |
Inhibitor Switch Repair procedures
Inspection
Power Circuit Inspection
1.
Disconnect the Inhibitor switch connector.
2.
Ignition KEY "ON"" & Engine "OFF"..
3.
Measure voltage between supplied power and ground at inhi ...
Power Sliding Door (PSD) Switch Repair procedures
Inspection
Overhead Console Door Switch Inspection
1.
When inspecting, use the inspection equipment to check for
input/output values of Overhead console door switch. If there''s any
malfunct ...