Kia Sedona: Rear Mud Guard Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Mud Guard Repair procedures

Third generation YP (2014-2022) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Mud Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, remove the rear mud guard (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Mud Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Sunroof
...

Other Information:

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

AVN keyboard Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the AVN keyboard unit (A). 3. Disconnect the AVN keyboard unit connector (A). Installati ...

Categories


Copyright © www.kisedona.com 2016-2022