Kia Sedona: Rear Glass Defogger Switch Repair procedures| Inspection |
| 1. |
The windshield deicer switch inputs can be checked using the GDS. |
| 2. |
To check the input value of windshield deicer switch, select option "Body Control Module". |
| 3. |
Select option "Current Data".
|
| 4. |
To perform functional test on SJB outputs, select "Actuation Test".
|
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual)) |
| Installation |
| 1. |
Install the heater & A/C control unit.
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (DATC))
(Refer to Heating, Ventilation, Air Conditioning - "Heater & A/C Control Unit (Manual)) |
| 2. |
Connect the negative (-) battery terminal. |
Rear Glass Defogger Printed Heater Repair proceduresLeft power sliding door opening or closing
When the power door ON/OFF button is ON (not depressed) :
The left sliding door is opened or closed automatically if the button is pressed
and held.
When the left sliding door is closed and more t ...
Floor mat anchor (s)
When using a floor mat on the front floor carpet, make sure it attaches to the
floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward.
The following must be observed w ...