Kia Sedona: Rear Door Belt Outside Weatherstrip Repair procedures - Rear Door - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Door Belt Outside Weatherstrip Repair procedures

Third generation YP (2014-2023) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Outside Weatherstrip Repair procedures

Replacement
1.
Pull down rear door window glass by pressing the power window glass switch.
2.
After loosening the mounting screws, remove the rear door belt outside weatherstrip (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Door Latch Repair procedures
Replacement [Front] 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Disconnect the rear door cable (A). 3. Disconnect the rear door remote controller connector ...

Rear Door Belt Inside Weatherstrip Repair procedures
Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. Install in the reverse order of removal. ...

Other Information:

Intake Air Temperature Sensor (IATS) Description and Operation
Description Integrated into the Barometric Pressure Sensor (BPS), the Intake Air Temperature Sensor (IATS) detects the intake air temperature. To calculate precise air quantity, correction of th ...

Rear Lower Arm Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Categories


Copyright В© www.kisedona.com 2016-2023