Inspection |
1. |
It can quickly diagnose defects of power window by
communicating with GDS. GDS can operate actuator forcefully, monitor
input/output values and self diagnose. |
2. |
Select model and "BCM". |
3. |
Select the "SJB" to check. |
4. |
Select "Current Data" if you wish to check the current data
of power window system. This menu provides input/output status of SJB. |
5. |
If you wish to check the power door lock operation forcefully, select "Actuation test". |
Indicator light
When ignition switch is turned to ON, the indicator light illuminates, then goes
off if the ESC system is operating normally.
The ESC indicator light blinks whenever ESC is operating or illuminat ...
Drive Belt Repair procedures
Removal and Installation
1.
Remove the engine room under cover and engine room RH side cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
2.
To release the tension, t ...