Replacement |
|
1. |
Using a screwdriver or remover, remove the front door quadrant inner cover (A). |
2. |
Loosen the outside rear view mirror mounting bolts & screw (A). |
3. |
Remove the outside rear view mirror (A) after disconnecting the outside rear view mirror connector (B). |
4. |
Install in the reverse order of removal.
|
Components and Components Location
Components
1. RH Cylinder head2. RH Cylinder head gasket3. LH Cylinder head4. LH Cylinder head gasket5. Cylinder block
1. Camshaft bearing cap 2. Camshaft thrust bearing cap 3. RH Exhaust ca ...
Shift Lever Repair procedures
Removal
1.
Move the shift lever to "N" range.
2.
Disconnect the battery negative (-) cable.
3.
Remove the knob (A) and boots (B) by pulling them in the
direction of the arrow after separ ...