Kia Sedona: License Lamps Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: License Lamps Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / License Lamps Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp assembly (A) after separating the license lamp mounting hooks.

3.
Remove the license lamp bulb (B) after removing the license lamp socket (A).

Installation
1.
Install the license lamp bulb.
2.
Install the license lamp assembly.
3.
Connect the negative (-) battery terminal.
Fog Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Remove the front fog lamp assembly (A) after loosening ...

High Mounted stop lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. (Refer to Body - "Rear Spoiler") 3. Remove the high mounted stop lamp assembly (A) after loosening nut ...

Other Information:

Power door ON/OFF button
When the power door ON/OFF button is ON (not depressed), the power sliding door and power tailgate can be controlled with the sub control buttons on the center pillar trim or tailgate. Also ...

Repair procedures
Inspection     Special care is needed for the following points in case of working with the non-gloss timber trimming. • Wrap a protective tape around tools used ...

Categories

Copyright © www.kisedona.com 2016-2026